Home
About DynaPath
Products
Delta Series CNC Controls
CNC Machines
Tool Room Series Mills
Tool Room Series Lathes
Support
Parts
Training
Where to buy/map
International
Inquiry
sales@dynapath.com
service@dynapath.com
parts@dynapath.com
|
DynaPath Delta 2000T Specifications |
MACHINE CONTROL CAPABILITIES
|
Simultaneous Two (X and Z) Axes of Control
Departures to 99.99999 Inches, or 9999.999 mm ( 999.9999
Inches or 9999.999mm optional)
Maximum Rapid Rates up to 1,200 IPM or 30 MPM
Block Processing Time 3 ms
Electric Servo Drive Outputs 10V Max
Interface for Digital Feedback Encoders
Servo Update Time 3 ms
Interface for Two Manual Handwheels
Spindle Speed Control: 5 Digits, 10 Volt Analog
Constant Surface Speed Control
Fixed Software Travel Limits
Part Programmable Software Travel Limits
Stored Safe Zones to Protect Chuck and Tailstock
Customer Initialized Machine Control Parameters
Auxiliary Functions: M, S, and T Codes
32 x 32 DC Inputs and Outputs plus 32 Row/Column Inputs for Operators
Panel Switches
PLC Programmable Logic Control with Flash Memory and Message Capability
|
OPERATOR FEATURES
|
-
Full-Travel Alphanumeric Keyboard
-
LCD-Defined Soft Keys
-
12-Inch High-Resolution (800 x 600) Color LCD for Information Display
-
Position Display with Soft Key Selections of Part and Machine Coordinates
-
Active Event and Subsequent Events Display
-
Spindle Speed Display and Feedrate Display
-
Part Program Storage and Display, 448,000 Characters
-
Buffered Input Allows Part Programs of Unlimited Length to be Executed from Floppy Disk
or from an External Source
-
Concurrent Operation Allows Part Programs to be Entered or Edited While Cutting a Part
-
Fault Messages and Program Text Messages
-
Program Zero, Axis Home and Axis Jog
-
Retract and Recover Feature to Simplify Tool Inspection and/or Tool insert Change
-
Test Modes and Program Inhibit
-
Optional Stop (M01) and Slash Code Block Delete
-
On-Line Diagnostics
-
Tool Tables:
-
Transmit/Receive Mode
-
Learn Mode
-
Catalog Mode with Capability to Store, Copy and Rename up to 250 Part Programs
|
PART PROGRAMMING AIDS
|
Programming Format Switchable Between DynaPaths Menu-Driven
Conversational and Conventional EIA/ISO G-Codes
Parameter Initialized G-Codes for Part Programming Compatibility between
different Machines
Decimal Point Programming
Inch/Metric Input and Mirror Image
Absolute/Incremental Programming
Radius and Diameter Programming
Cartesian Coordinate Programming
End Point Programming
Angle-Length Programming
Angle-Diameter Programming
Angle-Radius Programming
Automatic Fillet Generation
Automatic Chamfer Generation
Special Events
Three Types of Taper Programming
Seven Types of Thread Programming
Three Types of Groove Programming
Peck Drill Cycle
Tapping Cycle
Roughing and Finishing Cycles (Two Types to Accommodate both Bar Stock
and Castings) to Automatically Cut a Contour Defined by Turn,
Face, Taper and Arc Events. Inside, Outside or Face Cycles can be
Programmed.
Entry of Speeds and Feeds in Roughing and Finishing Cycles
Material Data Table for Standard and Special Materials Selected by
Operator for Automatic Macro Programming Mode, 4 Levels
High-Resolution Interpolated Graphics Display to Verify Part Profile and
Analyze Cutting Time Before Turning the Part
Conversational GraphicsR for Interactive Graphical Programming Help (The
Hard Disk Drive Optional Feature is a Prerequisite for Use of this Feature)
|
OPTIONAL FEATURES
|
Electronic Handwheel(s)
Part Program Storage Expansion to 896,000 Characters
RS-422 Serial Port in Place of RS-232 Port
DNC Terminal Mode
Customer Prepared Cycles (User Macros) for Custom Cutting and Probing
Cycles and for Special OEM-Designed Machine Functions
High-Speed Touch Trigger Probe Interface
Additional DC Inputs and Outputs
|
|
TOP
|
